Blisstool LTC64 Guida Utente Scaricare il pdf (Pagina 17)

8. Assembling and disassembling of the metal detector

The metal detector BLISSTOOL LTC64X is assembled in the following sequence:

1. The upper part of the lower connecting rod is attached to the lower part of intermediate

connecting rod via the small fixing ring, and adjusted at the appropriate length.

It is recommended that the mounting of the lower connecting rod to the intermediate

connecting rod should be carried out, following the sequence below:

- the small fixing ring has to be unscrewed loose from the intermediate connecting rod and put

on the lower connecting rod;

- the lower connecting rod is inserted in the intermediate connecting rod at the appropriate

length;

- the small fixing ring is tightened until it is fixed.

2. The upper part of the intermediate connecting rod is attached to the carrier rod via the

large fixing ring, and adjusted at the appropriate height.

It is recommended that the mounting of the intermediate connecting rod to the carrier rod

should be carried out, following the sequence below:

- the large fixing ring has to be unscrewed loose from the carrier rod and put on the

intermediate connecting rod;

- the intermediate connecting rod is inserted in the carrier rod at the appropriate length;

- the large fixing ring is tightened until it is fixed.

3. The search coil has to be adjusted horizontally against the ground surface, while the user is

in an upright (working) position and is holding the metal detector by the handle.

This adjustment is possible, if the plastic bolt and nut used for assembling the search coil with

the lower connecting rod are not tightly fastened.

4. The connecting shielded cable of the search coil is winded evenly and spirally up the lower

connecting rod, the intermediate connecting rod and the carrier rod up to the handle, provides

advance of the cable around the handle, as finally, the end connector of the cable is plugged in

and tightened on the connector COIL that lies on the back panel of the electronic block. The

plugging in and out of the cable connector is done while the metal detector is switched off

(VOLUME potentiometer is turned in "OFF" position (Fig.4)). Тhe cable is fixed through patches

type velcro included in the standard package.

The cable, at its lower end near the search coil, has to be slightly loose, so that it is not damaged

when the search coil has been bent against the lower connecting rod, for example when search or

when the device is folded for carrying and transporting.

IMPORTANT: The cable of the BLISSTOOL search coil is double shielded against electromagnetic

interferences. The cord length is about 1.6 meters, which combined with its twin aluminum screen,

makes it heavy. In this regard, in order to eliminate false signals and prevent damage of the

connector on the cable and of connector COIL, is necessarily, the shielded connecting cable of the

search coil to be wound tight spiral with a pitch about 12 cm along the length of the supporting

structure up to the handle and to be fixed to the supporting structure of the metal detector, a total of

three places: under the handle, over the handle and at the base of the lower connecting rod.

For fixing of the shielded connecting cable of the search coil, are used the included in the standard

package locking tape type Velcro.

The correct winding and fixing of the cable is shown in Fig.3 available below.

The purpose of winding of the cable tight spiral with a pitch about 12 cm along the length of the

supporting structure up to the handle, is the cable to be fixed during the search with the metal

detector.

If the cable is loose and moves during the search, this will generate false signals, since the metal

detector will detect the cable moving towards the search coil (more precisely its metal aluminum

screens).

For the same reason, after winding, the cable must be fixed at three places with Velcro patches:

fixation in the base of the lower connecting rod, to ensure the advance of the cable provided after

BLISSTOOL LTC64X - User Guide (version EN201505131231) Page 17 of 62

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

Commenti su questo manuale

Nessun commento

Lg DV582H Instrukcja Użytkownika (17 strony)

Marka: Lg | Kategoria: DVD players | Rozmiar: 1.34 MB |

Spis treści

DVD Player

Safety Precaution

Types of Playable Discs

Table of Contents

Hooking up the unit

Remote control

Main Unit

Adjust the settings

Displaying Disc Information

Playing a Disc

Playing a DivX movie file

ON REMOTE

Viewing photo files

Using an USB Flash Drive

USB Direct Recording

Language Codes

Area Codes

Specifications

Troubleshooting

Więcej produktów i instrukcji dla Odtwarzacze DVD LG

Modele	Rodzaj dokumentu
DP481B	Instrukcja Użytkownika LG DP481B Owner’s Manual, 16 strony
HT554TH	Instrukcja Użytkownika LG HT554PH,HT554TH Användar manual, 22 strony
DBRH1979	Instrukcja Użytkownika LG DBRH197 Owner’s Manual, 63 strony
DVD-3200E	Instrukcja Użytkownika LG DVD-3200E Användar manual, 39 strony
DVX8751	Instrukcja Użytkownika LG DVX8751 Användar manual, 109 strony
HT44C	Instrukcja Użytkownika LG HT44C Användar manual, 42 strony
HT502TH	Instrukcja Użytkownika LG HT502TH Owner’s Manual, 24 strony
LH-RH7505PA	Instrukcja Użytkownika LG LH-RH7505PA Owner’s Manual, 70 strony
V160	Instrukcja Użytkownika LG V160 Användar manual, 36 strony
RCT689H	Instrukcja Użytkownika LG RCT689H Användar manual, 72 strony
HT904TA	Instrukcja Użytkownika LG HT904TA Owner’s Manual [es] , 24 strony
RCS7700	Instrukcja Użytkownika LG RCS7700 Användar manual [en] [ja] [zh] , 68 strony
HB954SA	Instrukcja Użytkownika LG HB954SA Owner's manual, 52 strony
FB162	Instrukcja Użytkownika LG FB162 Användar manual, 27 strony
LH-T250SC	Instrukcja Użytkownika LG LH-T250SC Användar manual, 32 strony
RH399H	Instrukcja Użytkownika LG RH399H 使用手冊, 36 strony
DVDCR-19	Instrukcja Użytkownika LG DVDCR-19 Instruktionsbogen, 32 strony
DK764	Instrukcja Użytkownika LG DK764 Інструкція користувача, 23 strony
DP351	Instrukcja Użytkownika LG DP351 Användar manual, 14 strony
DGK875	Instrukcja Użytkownika LG DGK875 Owner's manual, 15 strony

Blisstool LTC64 Guida Utente Pagina 17

Commenti su questo manuale

LG DV582H podręczniki

Lg DV582H Instrukcja Użytkownika (17 strony)

Spis treści

Więcej produktów i instrukcji dla Odtwarzacze DVD LG